How does thermal transfer film technology adjust the amount of ink in the printing process?

How does thermal transfer film technology adjust the amount of ink in the printing process?

1-In the process of thermal transfer film technology, it is necessary to pay attention to the amount of ink to adjust the color to a certain degree. The special color matching of ink is the same as that of ordinary ink, but the color of thermal transfer ink printed on the thermal transfer film and transferred to the product is different, so what we need to use is to make good use of the thermal transfer film to transfer to the product and then look at the color and make fine adjustments.

2-However, our products need to pay attention to the following points in various adjustments when used in general:

1. Generally, light-colored ink is determined as the basic ink and other inks are added. Thermal transfer film technology needs to be used well so that the amount of ink adjustment is not too much.

2. When mixing ink, dark ink should be added gradually, and excessive amount should not be added at one time to avoid using a large amount of light-colored ink to remedy.

3. When the hue is close to the color sample, thermal transfer should be careful to add ink, especially for those dark inks and inks with low addition ratios. Be good at using the relationship between primary colors, intermediate colors, and complementary colors to mix inks.

4. When there is color deviation, you should choose the ink with the closest hue to add. For example, if the red is not yellow enough, you should choose golden red or orange red. Don't add yellow ink easily.

5. When using this thermal transfer paper technology, you need to pay attention to the effect of each adjustment viscosity on the ink color.

6. You must deeply understand the effect of the thickness of the ink layer on the depth of the color.

7. Keep the wet sample of the standard color ink and mark it. It can be used as a standard reference wet sample when mixing this ink next time. When mixing ink, it is beneficial to compare and contrast with the color wheel. However, since there are wet samples, the accuracy will be higher.

8. Thermal transfer paper technology takes into account the characteristics of post-printing processing. If the printed product needs to be glazed, you can choose general ink. If you choose ink with good abrasion resistance, it will not only be costly, but also affect the glazing effect.