Contour heat transfer machine

Contour heat transfer machine
1-The meaning of contour heat transfer machine
Contour heat transfer machine is a machine used for heat transfer of contour products. It transfers the exquisite pattern on the transfer film (paper) to the surface of the contour product through a one-time heat transfer process (heating and pressurization). After forming, the heat transfer ink layer and the product surface are melted into one.

2-Operation steps of contour heat transfer machine
Contour heat transfer machine

1. First check the contour heat transfer machine systematically;

2. Plug in the power supply by hand, turn on the power switch, and the power indicator light will light up immediately;

3. Adjust the machine according to the product to be printed, first install the fixture (the fixture of the contour heat transfer machine is more complicated), put the workpiece on, and adjust the rubber roller to a suitable distance from the workpiece;

4. Turn on the electric heating switch, adjust the thermostat to 100℃, let the rubber roller preheat, and after the temperature stabilizes at 100℃, adjust the set temperature to the hot stamping temperature required for the workpiece;

5. Next, step on the foot switch to complete a During the hot stamping cycle, observe the hot stamping situation and adjust it until the hot stamping achieves the best effect;

3-Daily maintenance of the profiling heat transfer machine

1. Regularly check the water accumulation in the filter cup of the profiling heat transfer machine, and drain it once per shift to avoid water entering the cylinder and causing accidents;

2. Regularly add lubricating oil to each lubrication point to ensure the normal operation of the machine;

3. After work, the working surface of the profiling heat transfer machine should be wiped clean, dust and dirt should be removed, and the machine should be kept clean. Before work, the emergency stop switch and foot switch should be tested and checked, the screws should be locked, and the wire connector should be checked for looseness.

The profiling heat transfer machine uses professionally designed parts and components, and the hot stamping is precise. It can meet the high-precision requirements of hot stamping of various profiling products. The various functions are easy to adjust, and the temperature, pressure, time and speed can be flexibly adjusted.