Thermal transfer rubber roller is an essential consumable

1-Thermal transfer rubber roller is an essential consumable
Thermal transfer rubber roller is an essential consumable
Thermal transfer rubber roller is an essential consumable in the thermal transfer processing procedures. It is an ideal choice for transferring decorative cylindrical peripheries and large flat or curved surfaces. Its material has a certain degree of hardness and can be matched with different surfaces of molded plastic parts, and it has high heat resistance and is easy to polish.

2-3 advantages of thermal transfer rubber roller
Heat resistance and heat conductivity
Thermal transfer rubber roller has very strong heat resistance, can withstand a minimum of -100 and a maximum of 350℃, and has very good thermal conductivity.

Aging resistance

Excellent resistance to ozone aging, oxygen aging, light aging and climate aging. After the silicone rubber is vulcanized and exposed to the sun for several years in a free state, the performance does not change significantly.

Electrical insulation

The electrical insulation of the vulcanized silicone roller will change less when it is damp, exposed to water or at a higher temperature. The silicon dioxide generated after combustion is still an insulator, which can ensure that the electrical equipment continues to work until it is repaired.

3-6 maintenance methods for thermal transfer rubber rollers
In order to ensure the quality of thermal transfer products, the maintenance process is a very important link. If the maintenance work is not done well, the sword will become scrap iron.

The price of an ordinary quality silicone wheel on the market is about 800 yuan, and its service life is about 2 and a half months. If it is not properly maintained, the life will be greatly shortened and the cost performance will also decrease. How should we maintain the thermal transfer rubber roller?

1. The hot rubber roller should be kept away from wind and water after being disassembled;

2. When stopping working, ensure that the rubber roller is in a rotating state within ten minutes to allow the rubber roller to dissipate heat fully;

3. If dirt is found on the surface of the rubber roller, it needs to be removed immediately. If it is not removed in time, it will affect the printing quality of the product;

4. The rubber roller cannot be cut or repaired with a blade, and sharp metal objects must not be used to contact the silicone wheel to reduce external damage.

5. Before using the rubber roller, check whether the temperature of the oven is normal and whether the motor is running normally. If it does not move, stop using it;

6. Use a suitable rubber roller according to the size of the pattern printed on the thermal printing rubber roller. The best size of the rubber roller is 5mm smaller than the thermal transfer film.