Thermal transfer film uses and precautions for use

The electroengraving plate for printing flower films is mainly used for pictures and texts with transitional colors and rich layers. It can reproduce the effects of characters, landscapes and high-end pictures and texts. The printed pictures and texts are clear, accurate and have strong adhesion ability. They are suitable for large batches. , high-demand plastic products, cultural and educational supplies, daily chemical packaging, etc. The temperature for heat transfer processing and flower film hot stamping is between 120 degrees Celsius and 240 degrees Celsius. It can be used for the coating surfaces of ABS, AS, PVC, PMMA, PP, PE and other plastic products, metal, wood, etc.

The hot stamping temperature of heat transfer printing film is between 120 degrees Celsius and 240 degrees Celsius. It can be applied to the coating surfaces of ABS, AS, PS, PVC, PMMA, PP, PE and other plastic products, metal, wood, etc. Precautions for hot stamping processing of thermal transfer printing film: Hot stamping is a special printing process. Its working principle is very simple. The graphics and text on the flower film are transferred to the product through heating and pressure. However, in specific production practice In order to improve the quality of products and improve production efficiency, the following points should also be paid attention to:

Keep it clean: Keep the workbench, guide rollers, buttons and other parts of the machine clean and free of oil and other dirt; keep the flower film clean and free of oil, fingerprints, dust, etc.; keep the rubber head clean and free of dirt. Dirt and scorch must be adhered to it; the operator's hands must be kept clean, and no sweat or oil can get on the flower film or the items to be ironed; the items to be ironed should be kept clean, and no dust, oil, etc. should be stained on them;

Hot stamping temperature: Hot stamping temperature varies according to different hot stamping equipment, hot stamping film, and hot stamping materials. Do not blindly pursue higher or (lower is better) hot stamping temperature. It should be based on the effect after hot stamping. Determine the hot stamping temperature. Hot stamping pressure: The hot stamping pressure must be adjusted to the most appropriate level. Otherwise, if it is too high, it will easily damage the rubber head and the object being ironed. If it is too small, it will affect the hot stamping effect. After adjusting to the optimal hot stamping pressure, the pressure adjustment should be locked to avoid changes during mass production.

Hot stamping time (speed): Hot stamping time (speed) should be determined according to the specific hot stamping object. The faster the speed, the higher the production efficiency while ensuring the hot stamping effect. However, some products are limited by certain special conditions. Slow hot stamping.