teach you to easily handle thermal transfer products

Know 2+5, teach you to easily handle thermal transfer products

1- Know 2+5, teach you to easily handle thermal transfer products

2 - Two things to pay attention to in thermal transfer production

3- Five things to pay attention to during thermal transfer processing

1 Know 2+5, teach you to easily handle thermal transfer products
The thermal transfer technology, known as the "emerging technology", has many things to pay attention to in production and processing. In summary, that is 2+5. As long as you are familiar with 2+5, you can easily handle thermal transfer products. What is 2+5? The interpretation is as follows.

Know 2+5, teach you to easily handle thermal transfer products

2 Two things to pay attention to in thermal transfer production
1. After normal printing of thermal transfer film, it is necessary to regularly sample and review the flower film without stopping the machine, including sampling and review of the left and right sides of the printed film and the upper and lower axis winding and transfer connection.

Once relevant printing problems (blocking, dot loss, new dots, inaccurate overprinting and other quality problems) are found, solutions should be organized and implemented. If the problem cannot be solved immediately, the machine should be slowed down or stopped to avoid large quantities of defective products.

2. After using the thermal transfer ink, try to seal it to reduce the possibility of solvent evaporation and ink solidification and deterioration. During the production process, try to minimize the ink and oil stains that stain the equipment. If it is accidentally stained, it should be wiped clean in time to prevent the ink from drying up and increasing the difficulty of cleaning.

3 5 things to pay attention to during thermal transfer processing
The thermal transfer film is perfectly integrated with the product, and thermal transfer processing is the key. If the processing is done well, the printed product is very beautiful, and the adhesion can remain unchanged for a long time.

So how to process a good thermal transfer product? As long as you pay attention to the following 5 points, the quality of the printed thermal transfer product will definitely be excellent. If you don’t believe it, try it!

1. Keep the surface of the substrate clean, free of dust and oil, so that the printed pattern is perfect;

2. Keep the thermal transfer film clean, and avoid oil, fingerprints, dust, etc. If it is accidentally stained, it must be cut off with a blade. Even if it is printed, the quality is not ideal;

3. The operator's hands must be kept clean, and sweat and oil must not be stained on the film or the surface of the substrate. If it is stained, it must be wiped off with a clean cloth;

4. Keep the machine's workbench, rubber roller, buttons and other parts clean and free of oil and other dirt;

5. The hot stamping time and speed should be determined according to the specific substrate. The faster the speed, the higher the production efficiency while ensuring the hot stamping effect. However, some products must be hot stamped slowly due to certain special conditions.